|
|
|
 |
|
|
 Product Highlights |
| |
|
| |
| Support Various Display Modes |
| |
| Display Modes Selection : |
|
|
 |
 |
 |
• Clone mode (1x1):
The VWBOX-E122 box displays the same content on the four screens. |
• Full mode (2x2):
The VWBOX-E122 box divides the input image into four sections and stretch the 1/4 image to fit to the selected resolution each monitor. The full display also support mask enable and disable. |
• Vertical Replication mode (1x2):
The IEI VWBOX-E122 can project the same image on the top two LCD panels and bottom two LCD panels. Customers can require only two LCD panels to create a larger display. |
|
| |
|
| |
• PIP mode (Mode 1~4):
The VWBOX-E122 box allows the 3/4 image displayed on three screen and full image displayed on the fourth screen. The VWBOX-E122 provides four display modes. |
| Selection |
Description |
| Mode 1 |
Full image display on the left-upper screen |
| Mode 2 |
Full image display on the right-upper screen |
| Mode 3 |
Full image display on the left-lower screen |
| Mode 4 |
Full image display on the right-lower screen |
|
|
|
| |
|
| |
| Support Any Size LCD Monitor |
| |
| The VWBOX-E122 is an cost-effective video wall box solution. It’s compatible with LCD monitor in any size and any brand. The maximum resolution supported is up to 1920 x 1200 per LCD monitor. |
| |
Source |
Resolution |
| Input |
DVI/ VGA/ Component |
720x350, 640x400, 720x400, 640x480, 800x 600, 832x624, 1024x768, 1152x864, 1152x 870, 1152x900, 1280x768, 1280x960, 1280x 1024, 1600x1200, 1680x1050, 1920x1200, NTSC/PAL /SECAM 480 I/P, 720 I/P, 1080 I/P |
| Output |
DVI |
1024x768, 1360x768, 1280x1024, 1400x 1050, 1680x1050, 1600x1200, 1920x1200 |
|
|
|
| |
|
| |
| Support Mask Function |
 |
| |
The VWBOX-E122 supports mask enabled and disabled functions control. When enable the mask function, the image is overlaid for each grid space. Users can easily adjust the image to fit in the monitor with mask enabled or disabled via a remote control. |
|
| |
|
| |
| Remote Control/ OSD Function |
| |
| The VWBOX-E122 is packed with a remote control for easy setting. The support functions are |
| » |
Output resolution selection |
   |
| » |
Display mode selection |
| » |
Bezel mask adjustment |
| » |
Input source selection |
| » |
Power on/off |
| » |
DIO control |
|
|
| |
|
| |
| The smartOSD for Remote Management / Digital IO Setting |
| |
IEI introduces the smartOSD software for remote manage and control VWBOX-E122 via RS-232 or DDC interface. The smartOSD supports all the remote control function, and it also allow the GPIO high/ low voltage setting. |
| |
|
|
| |
|
|
My IEI
Partner Zone
Where to buy
